TM 11-6625-444-14-2
lip is towards the front of the voltmeter.
e. Bottom Guard Cage Cover
(2) Hook the curved lip over the front of
position the bottom guard cage cover so that the
the panel flange; laying the cover rearward and
mounting holes align with the threaded spacers.
down.
(2) Fasten the cover securely with eight
(3) Fasten the bottom dust cover
by insert-
4-40 screws.
ing the two 6-32 screws through the
rear feet
and into the threaded chassis holes
and then
fasten the other two 6-32 screws to
retain the
f. Top Guard Cage Cover
sides of the cover.
(1) Place the top guard cage cover over
the guard cage so the mounting holes align with
h. Top Dust Cover
the five threaded spacers and four mounting
brackets.
(1) Orient the top dust cover so the curved
cover lip is towards the the front of the voltme-
ter.
(2) Fasten the cover securely with nine
4-40 screws.
(2) Hook the curved lip over the front pan-
el flange; laying the cover rearward and down.
g. Bottom Dust Cover
(3) Fasten the top dust cover with four
6-32 screws.
ient the bottom dust cover so the curved cover
