setting (holding torque) of all starters incorporating
5. DIFFERENCES IN MODELS
standard mounting pads, as well as starters equipped
with the new quick-disconnect features for mounting.
This manual covers only type B-1 starter torque
The tester is also equipped with suitable accessories to
tester, part No. RT320-200. No known unit differences
be used for testing electrical actuators and retraction
exist for the design covered by this manual.
motors.
6. TABULATED DATA
4. IDENTIFICATION
a. General:
Manufacturer .
Greer Hydraulics, Inc.,
tester is located on the lower right-hand side of
Los Angeles, Calif.
Part No .........
RT320-200
Type .............
Prony Brake, Type B-1
Dimensions ..
20 in. wide x 24 in.
high x 36 in. long
Weight .........
400 lb (estimated)
b. Torquemeters:
Manufacturer
Greer Hydraulics, Inc.,
Los Angeles, Calif.
Part No ........
DT320-293, DT320-
290, DT320-213
Range ..........
0 - 150 foot-pounds
0 - 500 foot-pounds
0 - 1500 foot-pounds
c. Tachometer:
Part No ......... .
870C
Range...........
0 - 1500 rpm
Figure 3. Nameplate
d. Brake Shoe Assembly:
Part No ........
H-2-353
tester base. It identifies the manufacturer, giving the
Range ..........
Up to 7 horsepower
type, part number, model number, and serial number.
absorption
e. Brake Pressure Control Assembly:
Part No .........
BT320-265
Type .............
Screw
4
