Section I. GENERAL
and special tools list. It is comprised of maintenance
accessories, tools, supplies, spare assemblies, repair
a. General. These instructions are published for
parts, and the quantities authorized maintenance
use of the personnel who operate and are responsible
for organizational, direct support, general support, and
The direct reporting of
depot maintenance of the Starter Torque Tester, Type
errors, omissions, and recommendations for improving
B-1, part No. RT320-200, manufactured by Greer
this technical manual by the individual user is authorized
Hydraulics, Inc., Los Angeles, California (fig. 1). They
and encouraged. DA Form 2028 will be used for
provide information on the operation, lubrication,
reporting these improvements. This form may be
troubleshooting, preventive maintenance services, and
completed using pencil, pen, or typewriter. DA Form
repair of the equipment, accessories, components, and
2028 will be completed by the individual using the
attachments as prescribed by the maintenance
manual and forwarded directly to Commanding General,
U.S. Army Aviation Materiel Command, P.O. Box 209,
Main Office, St. Louis, Missouri 63166.
of all publications applicable to this manual and
available to operating and maintenance personnel.
2. RECORD AND REPORT FORMS
maintenance allocation chart.
This chart assigns
The record and report forms listed in the
maintenance functions and repair operations to be
following subdivisions will be used by operating and
performed by the lowest appropriate echelon.
maintenance personnel for recording and reporting
operation and maintenance. For instructions as to the
use of listed forms, refer to TM 38-750.
a. DD Form 314
Schedule and Record
b. DA Form 2402
c. DA Form 2404
Equipment Inspection and
DA Form 2405
Maintenance Request Register
DA Form 2406
Materiel Readiness Report
DA Form 2407
DA Form 2409
Equipment Maintenance Log
Figure 1. Starter Torque Tester, Type B-1, Part No.