TM 55-4920-231-14
c. Cleaning and Inspection.
e. Installation.
(1) Install pipe nipple (15, figure 25) and
(1) Clean the parts, except the gaskets,
selector valve (37) on oil reservoir (36).
with cleaning solvent, Federal Specification P
(2) Place oil reservoir (36) in position on
D-680 or equivalent, and dry thoroughly.
chassis (51) and secure with lockwashers (22)
(2) Inspect the parts for cracks, breaks,
and screws (35).
deterioration, and damaged threads.
(3) Install elbow (13) and pressure check
(3) Report defective parts to higher au-
valve (16) on oil reservoir (36).
thority.
(4) Install tube assemblies (5, 33, and 34).
(5) Install chassis assembly (figure 24) in
tester case (paragraph 73c).
index numbers in figure 27.
