bleshooting can damage the TS-352B/U.
a. Battery Installation. To install the batteries
in the multimeter (fig. 2-2), place the multimeter
face down on a flat firm surface and proceed as
follows:
(1) Loosen the retaining screws that hold
the cover in place by turning the screws counter-
clockwise.
(2) Lift up and remove the cover. Place the
cover so that the connection diagram on the in-
side of the cover (fig. 2-3) can be easily referred
to in order to make the necessary connections.
(3) Connect three Dry Batteries BA-31 in
series; use the connectors supplied. Install the
batteries in the battery compartment, as indi-
cated by the connection diagram on the battery
compartment cover.
(4) Place Dry Battery BA-30 in the compart-
ment provided so the spring makes contact with
the bottom of the battery.
(5) Place the battery compartment cover on
the bottom of the multimeter.
(6) Align the retaining screws with their
proper holes.
(7) Hold the cover to prevent it from shift-
ing, and secure the cover in position by turning
