45. Replacement of Test Adapters
(fig. 10)
Replace test adapter X13B (used in TV-2/U, TV-2A/U, and
TV-2B/U) and test adapters X3B, X7B, and X10B (used in TV-
2B/U only) as follows:
a. Removal.
(1) Remove the tube tester chassis (par. 36) from the case.
( 2 ) Remove the hexagonal nut from the threaded stud of the
test adapter to be replaced. Remove the spacing sleeve
w h e n replacing test adapter X3B.
( 3 ) Remove the test adapter from the test socket.
b. Replacement.
(1) Plug the adapter into its corresponding test socket. Be
sure to place the spacing sleeve over the threaded stud
of test adapter X3B.
( 2 ) Replace and tighten the hexagonal nut.
(3) Replace the tube tester chassis in the case.
