ACCESSORIES FOR 310
Model 10 Clamp-on AC Ammeter- Cat No
60211
Ranges, 0-6-12-30-60-120-300
Model 101 - Line Separator-Cat. No 60-218
- Divides two conductor cords direct or
increases Model 10 sensitivity 10x and 20x.
Model 379 Carrying Case - Cat No 10-1456
For Model 310 and Model 10 combination, plus
Model 101.
Model 311 Lead - Cat. No 79-41642" long
lead to separate Model 10 from 310 unit for easy
reading In awkward spots. (now shown)
Model 369 Carrying Case - Cat. No 10-1258.
MODEL 10 INSTRUCTIONS
AC CLAMP-ON AMMETER ADAPTER
This adapter allows measurement of AC current with a VOM It is attached to the VOM with an extension lead. It may
also be attached to the top of the 310 series VOMs directly as shown on Page 14.
SPECIFICATIONS
Ranges:
0-6, 12, 30, 60, 120, 300 AC Amperes.
Accuracy
See Model 10 Instruction Sheet.
Frequency:
See Model 10 Instruction Sheet.
VOM Range and Sensitivity:
3 AC Volts at 5,000 ohms/volt.
AC CURRENT MEASUREMENTS
Using the adapter on top of Triplett Model 310 series VOMs -
1
Rotate the lever on the bottom of the adapter until it points straight out (See Figure 1).
2
Install the adapter on the top of the VOM Rotate the lever back against the adapter.
11
