AC VOLTAGE MEASUREMENTS
0-3 thru 0-300 Volts:
1.
Insert test leads in VOM and COM jacks.
2.
Set switch to appropriate ACV range.
3
Connect probes across voltage to be measured.
4
Read voltage on black AC-DC scale.
0-1200 Volts:
1
Insert test leads In COM and 1200 VAC jacks.
2.
Set switch to 3 ACV.
3.
Connect probes across voltage to be measured.
4.
Read voltage on the black AC-DC scale.
DO NOT TOUCH THE VOM while It is connected to high voltage!
BE CAREFUL around high voltage!
NOTE: For AC Amps measurements with the Model 10, disconnect the test leads The range switch should be set to 3
ACV.
RESISTANCE MEASUREMENTS
X1 thru X1K Ohms:
1.
Insert test leads into VOM and COM jacks.
2.
Set switch to appropriate OHMS range.
3.
Short test probes together.
8
