TM 55-4920-244-14
Figure 4-8. Deck Assembly (sheet 3 of 4).
tor bodies to prevent dam-
(3) Separate all components at cold
from
overheating
age
soldered or corroded joints. Clean terminals and
when soldering.
conductors of all solder and corrosion. Tin all
surfaces to be soldered and resolder joint.
(4) Replace resistors with nicked,
CAUTION
scored, or broken leads. Any precision resistor
Provide a heat sink on
showing signs of overheating should be re-
conductors between end of
placed and source of trouble determined
lead and precision resis-
