TM
55-4920-244-14
Section Ill. INSPECTIONS AND SERVICING
3-5. Service After Uncrating.
a. Inspect exterior of tester for condition
a. Clean tester, components, and acces-
of paint, evidence of corrosion, cracks, and deep
sories with dry cleaning solvent (item 1, table
dents.
1-1) .
b. Lubricate tester as outlined in para-
c. Inspect insulation check meter for
cracked lens and security in instrument compart-
ment.
d. Inspect for broken or otherwise dam-
aged knobs, receptacles, and switches in instru-
The operational preventive maintenance
ment compartment.
services are performed before operation, during
e. Insure that instruction plate, name-
operation, and after operation. These preventive
plate, and wiring diagram plate are legible and
maintenance services are listed in Table 3-1, In-
properly secured.
spection Requirements.
dents, deterioration, and proper stowage in probe
CAUTION
storage compartment (3).
g. Visually inspect wheels for breaks,
Stop operation immediately
deep cuts, and other defects.
if a defect is noted that
h. Ascertain that all cables, switch box,
could cause damage to the
junction box, and adapters have been shipped
tester by continuing the ope-
with tester and are stowed in cable storage com-
partment.
ration.
