of poor filtering in the equipment being tested.
e. Turn off the transistorized equipment
before switching the battery eliminator on or off.
The transient voltages, created by switching the
battery eliminator on and off, may exceed the
punch-through rating of the transistors. Make
sure that a normal load (such as a speaker for a
receiver) is connected to the transistorized equip-
ment before applying power.
f. Refer to the individual technical manual for
the equipment being tested.
2-8. Shutdown and Storage Procedures
a. Shutdown Procedure.
(1) Remove all test leads and accessories
from the jacks of the TS-352B/U and place them
in the test leads and accessories compartment
(2) Place the FUNCTION switch in the AC
(1) The original packing material may be
used for repacking.
Do not leave batteries in battery com-
partment for an extended period of
time. Corrosion of the batteries could
lead to severe damage to the equipment.