NOTES:
1. VOLTAGE MEASUREMENTS TAKEN WITH
20,000 OHMS-PER-VOLT METER
2. VOLTAGE MASUREMENTS ABOVE LEAD LINE
RESISTANCE MEASUREMENTS BELOW LEAD LlNE
3. ALL MEASUREMENTS TAKEN BETWEEN POINTS
INDICATED AND GROUND
4. NO TUBE IN TEST SOCKETS.
5. ON THE TV-2A/ U, RESISTORS R40 AND R42 ARE
MOUNTED ON THE REAR OF THE CHASSIS.
6. SWITCH AND CONTROL POSITION
Figure 13.
Resistor mounting board voltage and resistance diagram.
AGO 1428A
19
