TM 11-6625-3060-10
SELECTING PROPER RANGE
Connect the ME-526A/USM to the signal to be measured. Use the connection that is needed for the frequency to be
measured.
Note the rf millivoltmeter digital display. If the digital display is blank, an over t or an under u range indicator will also
appear.
NOTE
When a large input signal is applied to the RF PROBE, a relatively long
period of time may be needed before accurate measurement can be
made. This is caused by ME-526A/USM circuit saturation and by the high
amplitude of the input test signal (the input signal under test by the ME-
526AUSM).
2-7
