CONTROLS AND INDICATORS
A fuseholder is located on the mar panel containing either a 0.20 A, 115
V, or a 0.10 A, 220 V, Bussman MDL SLO-BLO fuse.
Input ac Power
Switch that is set to 115 or 230 (volts) according to the avalable power
The proper fuse size is required.
RECORDER Output Terminals
A dc voltage proportional to the front panel indicator reading is available
these terminals. Fs output = + 10 V; output resistance = 9 k ohms.
Adapter Storage Clips (3)
Three storage clips are located at the rear panel for securing accessories
and adapters which are not in use.
Printed Circuit Edge Connector
A card edge connector is mounted at the rear of the ME-526AIUSM.
This safety requirement symbol directs that it is necessary to refer to the
instruction manual. In this case it Is recommended that reference be
made to the instruction manual when connecting the ME-526A/USM
to the proper power source. It must be verified that the right fuse is
installed for the power available and that the 10 A -0.20 A, 50400 Hz
switch on the rear panel is set to the applicable operating voltage of
230 or 115 volts ac.