TM 11-6625-291-14/TO 33A1-7-23-1
6-16. TESTING OF METER.
This task covers:
Testing
INITIAL SETUP
Equipment Condition
Tools
Output meter on workbench
Tool Kit, Electronic Equipment
TK-105/G
Test Equipment
Materials/Parts
Decade Resistor TS-679/U
None
Meter Test Set TS-682/GSM-1
Personnel Required
One technician
ACTION
REMARKS
ITEM
LOCATION
NOTE
See paragraph 6-7 for removal of chassis from case.
TESTING
Using 3/8-inch wrench, remove. Tag wires.
Hex nuts (1) and
1 . Meter
leads (2)
2.
Connect the decade resistor, meter test set,
Decade resistor (3)
Meter test set (4)
and meter in series with each other.
3.
Decade resistor (3)
For the output meter model tested, adjust the
decade resistor to the value shown in the
table.
4.
Meter test set (4)
For the output meter model tested, adjust the
meter test set to the value shown in the
table.
6-26
