23. MOUNTING ADAPTERS
The mounting adapters (23 and 27, fig. 5) are
used for the starter or actuator to be mounted on. The
adapter is attached to the starter torque tester frame
with two socket head screws (24 or 28). The adapter
has pins or studs which the starter or actuator mounts
on. The starter or actuator is held in position on the
adapter by two quick-acting, self-positioning mounting
clamps (7, fig. 2). The mounting clamps are actuated
by cam shafts (5) and have adjusting screws to insure
that the best locking position on the cam shafts is
utilized. The mounting clamps are locked in position or
released by means of the two cam shafts.
Figure 13. Drive Couplings
13
