6.1 If it becomes necessary to ship the instrument, the following
steps should be followed:
a. Wrap the instrument with heavy wrapping paper and seal
the seams with gummed tape. Place in fibreboard carton
large enough to permit three inches of soft packing
material between instrument and sides of box.
b. Separately wrap with heavy paper and pad the correct
serial number probe and accessories and include with
c. Alternatively Boonton Electronics will provide an
appropriate shipping container and packing materials
at nominal cost. These may be obtained by writing
to the Sales Department, Boonton Electronics Corporation,
Route 287 at Smith Rd., Parsippany, N. J. 07054.