TM 11-6625-444-14-2
ACCURACY **
(0.1% of reading + 400 counts)
dc (coupled)
(0.2% of reading + 600 counts)
0.5 Hz to 1 kHz
(0.2% of reading + 400 counts)
1 kHz to 30 kHz
(0.8% of reading + 400 counts)
30 kHz to 100 kHz
(1.5% of reading + 600 counts)
100 kHz to 300 kHz
(3.0% of reading + 4000 counts)
300 kHz to 1 MHz
** Applies from 20,000 counts to 199,999 counts over a 90 day period at + 23C 2C.
Relative humidity less than 90%.
shunted by
(4) Shock and Vibration: Meets require-
ments of MIL-STD-810; Procedure IX, Method
less than 50 pF (less than 100 pF rear input)
514 and Procedure V, Method 516
(b) Temperature coefficient: (0.01%
(5) Ac voltage: 100/120/220/240 V 10
rdg + 6 LSD + 3 uV)/C Up to 10 kHz. (0.02%
% single phase, sinusoidal 50 to 400 Hz
rdg + 10 LSD + 3 uV)/C for 10 kHz to 1 MHz.
(6) Power: 50 watts
(c) Low pass filter: -3 dB at 10 kHz
(7) Display: 5 digit, polarity sign, 7
300
(to 40 Hz)
(d) Response time:
s e g m e n t LED, 0.43 inch (11 mm) character
30 sec (to 0.5 Hz) slow.
normal.
height, characters bright red
90 dB
(e) Common mode rejection:
at 60 Hz
c. Mechanical
(f) Crest factor: Full range (199,999
3.50 inches (88.9 mm)
(1) Height:
counts) 5 to 1. Half range (100,000 counts) 10
to 1.
16.75 inches (425.5 mm)
(2) Width:
(3) D e p t h : 17.12 inches (434.8 mm) be-
b. General
hind panel 17.625 inches (447.7 mm) overall.
(1) Temperature:
0 to 50C operating.
(4) Weight: 18 lbs.
-55C to +75 C storage.
(2) Humidity: Meets requirements of MIL-
STD-810; Procedure II, Method 507
(3) Altitude: Meets requirements of tvllL-
Digital Voltmeter AN/GSM-64C, power cable
STD-810; Procedure 1, Method 500
and test leads comprise an operable equipment.
