TM 11-6625-444-14-1
the item. The last line for each item in the BIIL
support item. The maintenance code entered in the
and ITIAL indicates the part number with the
third position will indicate the following level of
FSCM in parentheses. Items that are included in
maintenance:
kits and sets are listed below the name of the kit
Application/Explanation
Code
or set with the quantity of each item in the kit or
H - Support item is removed, replaced, used at the
set indicated in the quantity incorporated in unit
general level.
column.
(b) The maintenance code entered in the
g . Unit of Measure (U/M). Indicates the
fourth position indicates whether the item is to be
standard of the basic quantity of the listed item as
repaired and identifies the lowest maintenance level
used in performing the actual maintenance func-
with the capability to perform complete repair (i.e.,
tion. This measure is expressed by a two-
maintenance functions). This
all authorized
character alphabetical abbreviation (e. g., ea, in,
position will contain one of the following main-
pr, etc.). When the unit of measure differs from
tenance codes:
the unit of issue, the lowest unit of issue that will
Application/Explanation
Code
satisfy the required units of measure will be
H - The lowest maintenance level capable of
requisitioned.
complete repair of the support item is the
h. Quantity Furnished With Equipment (Basic
general support level.
Issue Items Only). Indicates the quantity of the
Z - Nonreparable. No repair is authorized.
basic issue item furnished with the equipment.
i. Quantity Authorized (Items Troop Installed
(3) Recoverability code. Recoverability y codes
or Authorized Only). Indicates the quantity of the
are assigned to support items to indicate the
item authorized to be used with the equipment.
disposition action on unserviceable items. The
j. Quantity Incorporated in Unit. Indicates the
recoverability code is entered in the fifth position
quantity of the item used in the breakout shown
of the Uniform SMR Code format as follows:
on the illustration figure, which is prepared for a
Defiinition
Recoverability
code
functional group, sub functional group, or an
H - Reparable item. W h e n uneconomically
assembly.
repairable condemn and dispose at the
general support level.
a. Repair parts kits and gasket sets appear as
unserviceable,
item.
When
Z - Nonreparable
the last entries in the repair parts listing for the
condemn and dispose at the level indicated
figure in which its parts are listed as repair parts.
in position 3.
b. Action change codes indicated in the left-
c. National Stock Number. Indicates the
hand margin of the listing page denote the
National stock number assigned to the listed item
following:
and will be used for requisitioning purposes.
N - Indicates an added item.
d. Part Numbcr. Indicates the primary number
C - Indicates a change in data.
used by the manufacturer (individual, company,
R - Indicates a change in NSN only.
firm, corporation, or Government activity), which
controls the design and characteristics of the item
a. When National stock number or part number
drawings,
means of its engineering
by
is unknown:
inspection
and
standards,
specifications
(1) First. Using the table of contents,
requirements, to identify an item or range of
determine the functional subgroup within which
items. For BIIL and ITIAL, see explanation of
the repair part belongs. This is necessary since
description column, f below.
illustrations are prepared for functional subgroups
NOTE
and listings are divided into the same groups.
item
is
stock-numbered
When a
(2) Second. Find the illustration covering the
requisitioned, the repair part received may
functional subgroup to which the repair part
have a different part number than the part
belongs.
being replaced.
(3) Third. Identify the repair part on the
e. Federal S u p p l y Code for Manufacturer
illustration and note the illustration figure and
(FSCM) . The FSCM is a 5-digit numeric code
item number of the repair part.
listed in SB 708-42 which is used to identify the
(4) Fourth. Using the Repair Parts Listing,
manufacturer, distributor, or Government agency,
find the figure and item number noted on the
etc. For BIIL and ITIAL, see explanation of
illustration.
description column, f below.
b. When National stock numbers and part
f. Description. Indicates the Federal item name
numbers is unknown:
and, if required, a minimum description to identify
Change 1
