TM 11-6625-291-14/TO 33A1-7-23-1
6-12. MAINTENANCE OF THERMAL RESISTOR (TS-585D/U).
This task covers:
1. Removal
2. Test
3. installation
INITIAL SETUP
Tools
Equipment Condition
Output meter on workbench
Tool Kit, Electronic Equipment
TK-105/G
Test Equipment
Materials/Parts
Resistance-Inductance-
Resistor, thermal
Capacitance Test Set
AN/URM-90
Personnel Required
One technician
ACTION
ITEM
REMARKS
LOCATION
NOTE
See paragraph 6-7 for removal of chassis from case.
REMOVAL
WARNING
Soldering iron is hot. Severe burns to personnel can result
from improper handling.
1. Thermal resistor
Leads (1)
Using cross-tip screwdriver and 5/16-inch
2. Terminal board
Screw (2), flat
wrench, remove.
TB1
washer (3), thermal
resistor (4), flat
washer (5) and hex
nut (6)
TEST
Test set (7)
Thermal resistor
Using test set, test thermal resistor.
Replace if bad.
6-18
