TM 11-6625-291-14/TO 33A1-7-23-1
ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES (CONT)
W - WEEKLY
INTERVAL
PROCEDURES
ITEM TO BE INSPECTED
ITEM
w
NO.
EXTERIOR SURFACES
2
Clean the exterior surfaces, including
the panel and meter glass. See chapter 3,
section Ill for cleaning procedures.
TEST LEADS
Check test leads for broken, cracked,
3
or frayed insulation.
Replace connectors that are broken or
worn.
BINDING POSTS
4
Check that test leads fit firmly into
binding posts to provide good contact.
Check handle and latches for looseness.
HANDLE AND
5
Replace or tighten as necessary
LATCHES
(Output Meters TS-585B/U, TS-585C/U
and TS-585D/U only).
--
6
IMPEDANCE CONTROL
Check that each knob moves freely
AND METER
and is not loose.
MULTIPLIER CONTROL
KNOBS
PANEL SCREWS
7
Tighten all panel screws.
METAL SURFACES
8
Check metal surfaces for rust and
corrosion. See chapter 3, section
Ill for touchup paint procedures.
MODIFICATION WORK
9
Check that all MWO'S are done.
ORDERS (MWO'S).
All URGENT MWO'S must be done at
once and all NORMAL MWO'S must be
scheduled.
4-5
