TM 9-6695-248-34P
PG -
Item procured and stocked to provide for sustained support for the life of the equipment. It is applied to an item
peculiar to the equipment which, because of probable discontinuance or shutdown of production facilities would
prove uneconomical to reproduce at a later time.
KD -
An item of a depot overhaul/repair kit and not purchased separately. Depot kit defined as a kit that. Provides
items required at the time of overhaul or repair
KF -
An item of a maintenance kit and not purchased separately. Maintenance kit defined as a kit that provides an
item that can be replaced at organizational or intermediate levels of maintenance.
KB.-
Item included in both a depot overhaul/repair kit and a maintenance kit. MO - Item to be manufactured or
fabricated at organizational level
MF -
Item to be manufactured or fabricated at the direct support fabricated at the general support maintenance level.
MD -.
Item to be manufactured or fabricated at the depot maintenance level
AO -.
Item to be assembled at organizational level
AF -.
Item to be assembled at direct support maintenance level
AH -
Item to be assembled at general support maintenance level.
AD -
Item to be assembled at depot maintenance level
XB -,
Item is not procured or stocked capable of complete repair If not available through salvage
XC -
Installation drawing, diagram instruction sheet, field service drawing, that is identified by manufacturer's part
number.
XD.-
A support item that is not stocked. When required, item will be procured through normal supply channels
NOTE
Cannibalization or salvage may be used as a source of supply for any items coded XA and aircraft support
items as restricted by ~AR 700-42.
(2) Maintenance Code. Maintenance codes are assigned to indicate the levels of maintenance authorized to
USE and REPAIR support items. The maintenance codes are entered in third and fourth positions of Uniform SMR
Code
(a) The maintenance code entered in the third position will indicate the lowest maintenance level
authorized to remove, replace, and use the support item. The maintenance code entered in the third
position will indicate one of the following levels of maintenance:
2
