TM 11-6625-585-24P
Code
Explanation
Code
Explanation
requirements for the item will result in the
O-
The
lowest maintenance level capable of
replacement of the next higher assembly.
complete repair of the support item is the
XB -
Item is not procured or stocked. If not available
organizational level.
through salvage, requisition.
F-
The lowest maintenance level capable of
XC -
Installation drawing, diagram instruction sheet,
complete repair of the support item is direct
field service drawing, that is identified by
support.
manufacturers' part number.
H-
The lowest maintenance level capable of
XD -
Support items can be requisitioned with
complete repair of the support item is general
support.
D-
The lowest maintenance level capable of
NOTE
complete repair of the support item is the
Cannibalization or salvage may be
depot level.
used as a source of supply for any
L-
Repair restricted to designated Specialized
items source coded above except
Repair Activity.
those coded XA and aircraft support
items as restricted by AR 700-42.
Z-
Nonrepairable. No repair is authorized.
B-
No repair is authorized.
The item may be
(2) Maintenance code. Maintenance codes are
reconditioned by adjusting, lubricating, etc., at
assigned to indicate the levels of maintenance
the user level. No parts or special tools are
authorized to USE and REPAIR support items. The
procured for the maintenance of this item.
maintenance codes are entered in the third and fourth
(3) Recoverability code. Recoverability codes are
positions of the Uniform SMR Code Format as follows:
assigned to support items to indicate the disposition
(a) Use (third position). The maintenance
action on unserviceable items. The recoverability code is
code entered in the third position indicates the lowest
entered in the fifth position of the uniform SMR Code
maintenance level authorized to remove, replace, and
Format as follows:
use the support item. The maintenance code entered in
Code
Explanation
the third position indicates one of the following levels of
maintenance.
Z-
Nonrepairable item.
When unserviceable,
condemn and dispose at the level indicated in
Code
Application/Explanation
the first digit of the maintenance code.
O-
Support item is removed, replaced, used at the
O-
Repairable item.
When uneconomically
organizational level of maintenance.
repairable, condemn and dispose at
organizational level.
NOTE
A code "C" may be used in this
F-
Repairable item.
When uneconomically
position to denote crew or operator
repairable, condemn and dispose at the direct
maintenance
performed
within
support level.
organizational maintenance.
H-
Repairable item.
When uneconomically
F-
Support item is removed, replaced, used at the
repairable, condemn and dispose at the
direct support maintenance level.
general support level.
H-
Support item is removed, replaced, used at the
D-
Repairable item. When beyond lower level repair
general support maintenance.
capability, return to depot. Condemnation
and disposal not authorized below depot
D-
Support items that are removed, replaced, used
level.
at depot only.
L-
Repairable item. Repair, condemnation, and
(b) Repair (fourth position). The maintenance code
disposal not authorized below depot/Specialized
entered in the fourth position indicates whether the item
Repair Activity level.
is to be repaired and identifies the lowest maintenance
A-
Item requires special handling or condemnation
level with the capability to perform complete repair (i.e.,
procedures because of specific reasons (i.e.,
all authorized maintenance functions).
When a
precious metal content, high dollar value,
maintenance code is not used a dash (-) sign is entered.
critical material or hazardous material).
For multiservice equipment/systems or when a code is
entered, this position will contain one of the following
maintenance codes as assigned by the service(s) that
require the code:
3
TM 11-6625-585-24P
b. Federal Stock Number. Indicates the Federal
stock number assigned to the item.
