TM 11-6625-585-24P
SECTION I
INTRODUCTION
Code
Explanation
1-1.
Scope
PC -
Item procured and stocked and which otherwise
This manual lists repair parts and special tools required
would be coded PA except that it is
for the performance of organizational, direct support,
deteriorative in nature.
general support, and depot maintenance of the ME-
PD - Support item, excluding support equipment,
65A/U. The PCCN for the ME65A/U is GTEAGF for all
procured for initial issue or outfitting and
models.
stocked only for subsequent or additional
initial issues or outfittings. Not subject to
1-2.
General
automatic replenishment.
This repair parts and special tools list is divided into the
PE - Support equipment procured and stocked for
following sections:
initial issue or outfitting to specified
a. Prescribed Load Allowance (PLA) - Section II.
maintenance repair activities.
Not applicable.
PF - Support equipment which will not be stocked but
b. Repair Parts List - Section III. A list of repair
which will be centrally procured on demand.
parts authorized for the performance of maintenance at
PG - Item procured and stocked to provide for
the organizational level. This repair parts list is arranged
sustained support for the life of the
in alphabetical order.
equipment. It is applied to an item peculiar to
c. Special Tools, Test and Support Equipment -
the equipment which because of probable
Section IV'. Not applicable.
discontinuance or shutdown of production
d. Repair Parts List - Section V. A list of repair
facilities would prove uneconomical to
parts authorized for the performance of maintenance at
reproduce at a later time.
the direct support, general support, and depot level.
KD - An item of depot overhaul/repair kit and not
e. Special Tools, Test and Support Equipment -
purchased separately. Depot kit defined as a
Section, VI. Not applicable.
kit that provides items required at the time of
f. Index -Federal Stock Number c and Reference
overhaul or repair.
Number Cross-Reference to Figure and Item Number-
KF-
An item of a maintenance kit and not purchased
Section VII. A list, in ascending numerical sequence, of
separately. Maintenance kit defined as a kit
all Federal stock numbers appearing in the listings,
that provides an item that can be replaced at
followed by a list, in alphanumeric sequence, of all
organizational or direct support or general
reference numbers appearing in the listings. Federal
support levels of maintenance.
stock number and reference numbers are cross-
KB - Item included in both a depot overhaul/repair kit
referenced to each illustration figure and item number or
and a maintenance kit.
reference designation appearance.
MO - Item to be manufactured or fabricated at
1-3.
Explanation of Columns
organizational level.
MF - Item to be manufactured or fabricated at direct
The following provides an explanation of columns found
support maintenance level.
in the tabular list.
MH - Item to be manufactured or fabricated at general
a. Source, Maintenance, and, and Recoverability
support maintenance level.
Codes (SMR).
MD - Item to be manufactured or fabricated at depot
(1) Source code. Indicates the manner of
maintenance level.
acquiring support items for maintenance, repair, or
AO - Item to be assembled at organizational level.
overhaul of end items. Source codes are:
AF-
Item to be assembled at direct support
Code
Explanation
maintenance level.
PA - Item procured and stocked for anticipated or
AH - Item to be assembled at general support
known usage.
maintenance level.
PB - Item procured and stocked for insurance
AD - Item to be assembled at depot maintenance level.
purposes because essentiality dictates that a
XA - Item is not procured or stocked because the
minimum quantity be available in the supply
systems.
2
