through 2-5), and proceed with the functions until
an abnormal condition or result is observed. Note
the abnormal condition, or result, and refer to the
troubleshooting chart (para 3-7). Perform the
checks and corrective actions indicated in the
troubleshooting chart. If the corrective measures
indicated do not result in correction of the trou-
ble, higher maintenance category repair is re-
quired. Paragraphs 2-2, 2-3, and 2-4 contain addi-
tional information and step-by-step instructions
for performing equipment tests and adjustments
to be used dining the troubleshooting proce-
dures.
b. All possible malfunctions that may occur are
not listed, nor all tests or inspections and correc-
tive actions. If a malfunction is not listed (except
when malfunction and cause are obvious ) or is not
corrected by listed corrective actions, notify your
supervisor.
NOTE
Before using this chart, be sure all ap-
plicable operating checks have been per-
formed.
