TM 11-6625-2946-14/TM 08168A-14/1
figure represents the average time required to restore an
B-4. Tool and Test
Equipment
Re-
item (assembly, subassembly, component, module, end
q u i r e m e n t s (See III)
item or system) to a serviceable condition under typical
a. Tool or Test Equipment Reference Code. The
field operating conditions. This time includes prepara-
numbers in this column coincide with the numbers used
tion time, troubleshooting time, and quality assurance/
in the tools and equipment column of the MAC. The
quality control time in addition to the time required to
numbers indicate the applicable tool or test equipment
perform the specific tasks identified for the maintenance
for the maintenance functions.
functions authorized in the maintenance allocation
b. Maintenance Category. The codes in this column
chart. Subcolumns of column 4 are as follows:
indicate the maintenance category allocated the tool or
C--Operator/Crew
test equipment.
O--Organizational
c. Nomenclature. This column lists the noun name
F--Direct Support
and nomenclature of the tools and test equipment re-
H--General Support
quired to perform the maintenance functions.
D--Depot
d. National/NATO Stock Number. This column lists
e. Column 5, Tools and Equipment. Column 5
the National/NATO stock number of the specific tool or
specifies by code those common tool sets (not individual
test equipment.
tools) and special tools, test, and support equipment re-
e. Tool Number. This column lists the manufacturer's
quired to perform the designated function.
part number of the tool followed b; the Federal Supply
f. Column 6, Remarks. Column 6 contains an
Code for manufacturers (5-digit) in parentheses.
alphabetic code which leads to the remark in section IV,
Remarks, which is pertinent to the item opposite the par-
B - 5 . Remarks (Sec IV)
ticular code.
a. Reference Code. This code refers to the appropriate
item in section II, column 6.
b. Remarks. This column provides the required ex-
planatory information necessary to clarify items appear-
ing in section 11.
(Next printed page is B-3)
B-2
