TM 11-6625-2616-24P
TM 11-6625-524-14
A--Item requires special handling or condem-
Operator,
Organiza-
n a t i o n procedures because of specific
tional, Direct Support,
reasons (i.e., precious metal content,
General Support and
high dollar value, critical material or
Depot
Maintenance
h a z a r d o u s material). Refer to approp-
Manual: Digital Volt-
riate manuals/directives for specific
meter AN/GSM64A
instructions.
b . Federal Stock Number. T h i s c o l u m n i n d i -
cates the Federal stock number assigned to the
a. When a Federal stock number or reference
number is unknown:
item and will be used for requisitioning
( 1 ) Find the illustration covering the repair
purposes.
part.
c. Description. T h i s c o l u m n i n d i c a t e s t h e
F e d e r a l item name and a minimum description
(2) Identify the repair part on the illustra-
t i o n and note the reference designation of the
r e q u i r e d to identify the item. The last line indi-
repair part.
cates the reference number followed by the
(3) When the reference designation is de-
applicable Federal Supply Code for Manufac-
termined, refer to the reference designation
turer (FSCM) in parentheses. The FSCM is used
i n d e x (sec IV). The reference designations are
as an element in item identification to designate
listed in alphanumeric ascending order and
manufacturer or distributor or Government
are cross-references to the page number on
agency, etc., and is identified in SB 708-42.
w h i c h they appear in the repair parts lists (sec
d. Unit of Measure (U/M). A t w o - c h a r a c t e r
II). Refer to the page number noted in the index
alphabetic abbreviation indicating the amount
a n d locate the item in the repair parts list (col.
or quantity of the item upon which the allo-
10b).
wances are based; e.g. ft, ea, pr, etc.
b. W h e n t h e F e d e r a l s t o c k n u m b e r o r r e f e r -
e. Quantity Incorporated in Unit. This col-
e n c e number is known:
u m n indicates the quantity of the item used in
( 1 ) Use the Federal stock number and re-
an assembly. Subsequent appearances of the
ference number index (sec III) and find the per-
s a m e item in the same assembly are indicated
tinent Federal stock number or reference
by the letters "REF."
n u m b e r . This index is in ascending FSN sequ-
f. 15-Day Organizational Maintenance. N o t
ence, followed by a list of reference numbers in
applicable.
ascending
alphanumeric
sequence,
cross-
g . Allowances (30-Dag DS/GS Maintenance, 1
- r e f e r e n c e d to the illustration figure number and
Y e a r Per Equipment (Contingency), and Depot
reference designation.
M a i n t e n a n c e . Items authorized for requisition
( 2 ) Use the repair parts list (sec II) to find
a s required are identified by an asterisk in the
the repair part and the illustration figure
a l l o w a n c e column. Subsequent appearances of
n u m b e r and reference designation referenced in
t h e same item will have the letters "REF."
t h e FSN and reference number index (see III).
h. Illustrations. This column is divided as fol-
lows:
(1) F i g u r e n u m b e r . I n d i c a t e s t h e f i g u r e
l i c a t i o n Improvements
n u m b e r of the illustration in which the item is
The reporting of errors, omissions, and recom-
shown.
mendations for improving this publication by
(2) I t e m n u m b e r o r r e f e r e n c e d e s i g n a t i o n .
the individual user is encouraged. Reports
Indicates the reference designation used to
should be submitted on DA Form 2028 (Recom-
identify the item in the illustration.
mended Changes to Publications and Blank
1-4. Special Information
F o r m s ) and forwarded direct to Commander, US
Army Electronics Command, ATTN: AMSEL-
The following publication pertains to the AN/
M A - S , Fort Monmouth, NJ 07703.
GSM-64A.
