SHIPMENT AND LIMITED STORAGE, AND DEMOLITION
TO PREVENT ENEMY USE
Section I. SHIPMENT AND LIMITED STORAGE
Disassembly of Equipment
Prepare the AN/GSM64A for shipment and stor-
age as follows:
a. Disconnect the power cord from the power
b. Packaging. Package the digital voltmeter
b. Roll the power cord into a neat roll and
secure it with a small piece of twine.
(1) Seal the AN/GSM-64A in the barrier
c. Disconnect the test lead set and test lead
(2) Cushion the AN/GSM64A on all sides,
from any voltage sources and from the AN/GSM-
(3) Seal the test lead set, test lead, and the
d. Roll the leads into neat rolls and secure them
technical manual in the barrier material and
with a small piece of twine.
package them in a small flat wrap of corrugated
material. Secure the wrap with gummed tape.
(4) Place the package on top of the digital
(5) Cushion the top of the package with a
a. Material Requirements. The materials listed
in the chart below are required for packaging
Digital Voltmeter AN/GSM64A. If the original
(6) Place the cushioned unit within a wrap
packaging material is available, only the tape is
of corrugated fiberboard, or, preferably, the orig-
required. For stock numbers of materials, refer
inal corrugated shipping box. Secure the wrap or
to SB 38-100.
box with the cloth-backing tape.
Section Il. DEMOLITION OF MATERIEL TO PREVENT ENEMY USE
(2) Remove the top cover and smash as
Authority for Demolition
many of the exposed parts as possible.
to prevent the enemy from
b. Cut. Use axes, handaxes, machetes, or simi-
using or salvaging the equipment. Demolition of
lar tools to cut cabling and wiring. Use a heavy
the equipment will be accomplished only upon
axe or machete to cut the power cord. Cut the
the order of the commander.
power cord and cables in a number of places.
Methods of Destruction
a. Smash. Use sledges, axes, hammers
incendiary devices. Use these items only
bars, and any other heavy tool available to smash
when the need is urgent.
the interior portion of the AN/GSM64A.
(1) Use the heaviest tool on hand to smash
c. Burn. Burn the technical manuals first. Burn
the connectors, controls, and indicator lights.
as much of the equipment as is flammable; use