AC. . . . . . . . . . . Alternating current
can be accomplished by converting the
DC . . . . . . . Direct current
equipment quantity to a decimal fac-
FT. . . . . . . . . . . . . Foot (feet)
tor by placing a decimal point before
ID. . . . . . . . . . . . . . . Inside diameter(s)
the next to last digit of the number
IN . . . . . . . . . Inches(es)
to indicate hundredths, and multiply-
LG . . . . . . Long (length)
ing the decimal factor by the parts
MAKEFR. . . . . . . . . . . . . Make from
M A X . . . . . . . . . . . . . . . Maximum
quantity authorized in the 51-100 al-
MTG . . . . . . . . . . . Mounting(s)
lowance column. Example, authorized
OD . . . . . . . . . Outside diameter(s)
allowance for 51-100 equipments is
PSI . . . . . . . . . . . Pounds per square inch
40; for 150 equipments multiply 40 by
U/W. . . . . . . . . . . . Used with
1.50 or 60 parts required.
6. Federal Supply Code for Manufacturers.
g. 1-Year Allowance Per 100 Equipments/
Code
Manufacture and Location
Contingency Planning Purposes. (Not applic-
able).
07707
United Shoe Machinery Corp Fastener
Division
h. Illustration.
510 River Rd Shelton CT 06485
(1) Figure Number. Indicates the figure
81349
Military Specifications Promulgated by
number of the illustration in which
Standardization Div
the item is shown.
Directorate of Logistic Services DSA
(2) Item Number. Indicates the call-out
86786
Rice Carroll W Piedmont CA
88044
Aeronautical Standards Group Dept of
number used to reference the item in
Navy and Air Force
the illustration.
96096
Military Standards Promulgated by Stan-
dardization Div
4. Special Information.
Directorate of Logistic Services DSA
Attaching parts are listed immediately after
99664
United Manufacturing Division of UMC
Electronics co
the part(s) they attach and in the same indent.
460 Sackett Point Road North Haven
They are separated from the part(s) by the
CT 06473
words "attaching parts." When they attach an
7. Recommendations for Equipment Manual
assembly which is broken down to show detail
Improvements.
parts, the attaching parts are separated from
the details of the assembly by the symbol
Report of errors, omissions, and recommen-
*( . . * . . . . " Details of the assembly then are
.
dations for improving this publication by the
indented one space to the right of their next
individual user is encouraged. Reports should
higher assembly, which appears above the at-
be submitted on DA Form 2028 (Recommended
taching parts.
Changes to DA Publications) and forwarded
direct to the Commanding General, U.S. Army
5. Abbreviations (Mnemonic Codes)
Aviation Systems Command, ATTN: AMSAV-
R-MLRA, P. O. Box 209, St. Louis, MO 63166.
The following abbreviations and mnemonic
codes are used:
iii
