a. Removal.
(3) Remove nuts (6 and 10), washers (7 and
11), and bolts (8 and 12) securing brake
shoe assembly (5) to carrying arm (30).
(1) Perform procedures outlined in paragraph
Remove brake shoe assembly.
46a.(1) and (2).
b. Installation.
(2) Remove nuts (10, fig. 5), washers (11),
and bolts (12).
(1) Position brake shoe assembly (5) on
carrying arm (30). Secure in place with
(3) Remove brake pressure control assembly
bolts (8 and 12), washers (7 and 11), and
(9) from carrying arm (30).
nuts (6 and 10).
(2) Connect hydraulic line to brake pressure
b. Installation.
control assembly (9).
(3) Position brake drum and mounting plate
(1) Place brake pressure control assembly (9)
assembly (1) on drive shaft and over
on carrying arm (30) and secure in
brake shoe assembly (5). Secure in place
position with bolts (12), washers (11), and
with keys (4), lockwasher (3), and locknut
nuts (10).
(2).
(2) Perform procedures outlined in paragraph
47. BRAKE PRESSURE CONTROL ASSEMBLY
46b.(2) and (3).
21
