TM 11-6625-599-12, C4
NOTE
tional group, subfunctional group, or an assembly.
When a stock-numbered item is requisi-
A5-4. Special Information
tioned, the repair part received may have
The illustrations in this appendix are identical to
a different part number than the part
those published in TM 114625-59945. Only those
being replaced.
parts assigned the third position SMR maintenance
e. Federal Supply Code for Manufacturer
code `` C" or `` O" are listed in the tabular listing,
(FSCM). The FSCM is a 5-digit numeric code listed
therefore, there may be a break in the item number
in SB 708-42 which is used to identify the manufac-
sequence. Only illustrations containing organiza-
turer, distributor, or Government agency, etc.
tional authorized items appear in this appendix.
f. Description. Indicates the Federal item name
A5-5. How to Locate Repair Parts
and, if required, a minimum description to identify
When National stock number or part number is
the item.
unknown:
g. Unit of Measure (U/M). Indicates the standard
a. First. Find the illustration covering the func-
of the basic quantity of the listed item as used in
tional group or subgroup to which the repair part
performing the actual maintenance function. This
belongs.
measure is expressed by a two+character alphabeti-
b. Second. Identify the repair part on the illustra-
cal abbreviation (e.g., ea, in, pr, etc.). When the unit
tion and note the illustration figure and item num-
of measure differs from the unit of issue, the lowest
ber of the repair part.
unit of issue that will satisfy the required units of
c. Third. Using the Repair Parts Listing, find the
measure will be requisitioned.
figure and item number noted on the illustration.
h. Quantity Incorporated in Unit. Indicates the
A5-6. Abbreviations
quantity of the item used in the breakout shown on
the illustration figure, which is prepared for a func-
Not applicable.
(Next printed page is 8)
7
