TM 11-6625-291-40P
(b) The maintenance code entered in the
the entry for each special tool, special TMDE, and
fourth position indicates whether the item is to be
other special support equipment. When density of
repaired and Identifies the lowest maintenance
equipments supported exceeds density spread in-
level with the capability to perform complete
dicated in the basis of issue, the total authoriza-
repair (i.e., all authorized maintenance functions).
tion is increased accordingly.
This position will contain one of the following
maintenance codes:
g. Unit of Measure (U/M). Indicates the stan-
dard of the basic quantity of the listed Item as
used in performing the actual maintenance func-
Code
Application/Explana tion
tion. This measure is expressed by a two-
character alphabetical abbreviation (e.g., ea, in, pr,
Z Nonreparable. No repair is authorized.
etc). When the unit of measure differs from the
unit of issue, the lowest unit of issue that will
(3) Recoverability code. Recoverability
satisfy the required units of measure will be
codes are assigned to support items to indicate
requisitioned.
the disposition action on unserviceable items.
The recoverability code is entered in the fifth posi
h. Quantity Incorporated in Unit. Indicates the
tion of the Uniform SMR Code format as follows:
quantity of the item used in the breakout shown
on the illustration figure, which is prepared for a
Recoverability
functional group, subfunctional group, or an
Code
Definition
assembly. A "V" appearing in this column in lieu
of a quantity indicates that no specific quantity is
Z - Nonreparable item. When unser-
applicable, (e.g., shims, spacers, etc).
viceable, condemn and dispose at
the level indicated in position 3.
4. Special Information
c. /Vational Stock Number. Indicates the Na
a. Usable on codes are shown in the description
tional stock number assigned to the item and will
column. Uncoded items are applicable to all
be used for requisitioning purposes.
models. Identification of the usable on codes
used in this publication are:
d. Federal Supply Code for Manufacturer
(FSCM). The FSCM is a 5digit numeric code listed
Used On
Code
in SB 70841/42 which is used to identify the
manufacturer, distributor, or Government agency,
etc.
TS-585A/U
AGM
TS-585/BU
AGN
e. Part Number. Indicates the primary number
TS-585C/U
AGO
used by the manufacturer (individual, company,
TS-585D/U
ATX
firm, corporation, or Government activity), which
controls the design and characteristics of the
b. The following publications pertain to the
item by means of its engineering drawings,
TS-585A/U, TS-585B/U, TS-585C/U and TS-585D/U
specifications, standards, and inspection re-
and its components:
quirements to identify an item or range of items.
TM 114825-291-14 Output Meters TS-585A/U,
NOTE
TS-585B/U, TS-585C/U and Audio Level Meter
TS-585D/U.
When a stock numbered item is requisi-
TM 11-6625-291-20P Output Meters TS-585A/U,
tioned, the repair part received may
TS-585B/U, TS-585C/U and Audio Level Meter
have a different part number than the
TS-585D/U.
part being replaced.
c. National stock numbers (NSN'S) that are
f. Description. Indicates the Federal item
missing from P source coded items have been ap-
name and, if required, a minimum description to
plied for and will be added to this TM by future
identify the item. In the Special Tools List, the in-
change/revision when they are entered in the
itial basis of issue (BOI) appears as the last line in
2
