Precision Instruction Manual
TS-73510 AN-2
Universal Penetrometer
Catalog 73510
Introduction
Your satisfaction and safety are important to PRECISION SCIENTIFIC and a complete understanding of this unit is
necessary to attain these objectives.
As the ultimate user of this apparatus, it is your responsibility to understand its proper function and operational
characteristics. This instruction manual should be thoroughly read and all operators given adequate training before
attempting to place this unit in service. Awareness of the stated cautions and warnings, and compliance with
recommended operating parameters-together with maintenance requirements-are important for safe and satisfactory
operation. The unit should be used for its intended application; alterations or modifications will void the Warranty.
WARNING:
As a routine laboratory precaution, always wear safety glasses when working with this
apparatus.
This product is not intended, nor can it be used, as a sterile or patient connected device. In addition, this apparatus is not
designed for use in Class I, II, or III locations as defined by the National Electrical Code.
Unpacking and damage
Save all packing material if apparatus is received damaged. This merchandise was carefully packed and thoroughly
inspected before leaving our factory. Responsibility for its safe delivery was assumed by the carrier upon acceptance of
the shipment; therefore, claims for loss or damage sustained in transit must be made upon the carrier by the recipient as
follows:
Visible Loss or Damage: Note any external evidence of loss or damage on the freight bill, or express receipt, and have it
signed by the carrier's agent. Failure to adequately describe such external evidence of loss or damage may result in the
carrier's refusing to honor your damage claim. The form required to file such a claim will be supplied by the carrier.
Concealed Loss or Damage: Concealed loss or damage means loss or damage which does. not become apparent until
the merchandise has been unpacked and inspected. Should either occur, make a written request for inspection by the
carrier's agent within 15 days of the delivery date; then file a claim with the carrier since the damage is the carrier's
responsibility.
By following these instructions carefully, we guarantee our full support of your claim to be compensated for loss from
concealed damage.
DO NOT --FOR ANY REASON --RETURN THIS UNIT WITHOUT FIRST OBTAINING AUTHORIZATION. In any
correspondence to PRECISION SCIENTIFIC please supply the nameplate data, including catalog number and serial
number.
-1-
